MSDS for Defoamer
1. Identification
Product Name: Industrial Defoamer Concentrate
Product Code: DF-2032
Recommended Use: Foam control agent for industrial water systems, paper manufacturing, wastewater treatment, and chemical processes
Supplier: GreenTech Solutions, Industrial Chemicals Division, 200 Commerce Drive, Houston, TX 77001
Contact Phone Number: 1-800-555-6752
Emergency Telephone: CHEMTREC 1-800-424-9300
2. Hazard Identification
GHS Classification: Not classified as hazardous under GHS criteria
Primary Hazards: Low acute toxicity, may cause mild skin or eye irritation on prolonged contact
Signal Word: None
Hazard Pictograms: None
Precautionary Statements: Avoid eye and prolonged skin contact, use in adequately ventilated areas
Other Hazards: Risk of slipping on spilled product, mild environmental concern if released to waterways
3. Composition / Information on Ingredients
Polydimethylsiloxane (PDMS): 10-30%, CAS No. 63148-62-9
Emulsifiers (Nonionic, Proprietary): 1-5%
Water: 60-80%
Minor Additives: <1%, performance enhancers (proprietary, nonhazardous)
Impurities and Stabilizers: Trace amounts, not considered hazardous
4. First Aid Measures
Inhalation: Move to fresh air, rest, seek medical advice if respiratory symptoms develop
Skin Contact: Wash with plenty of soap and water, remove contaminated clothing, seek medical attention if irritation persists
Eye Contact: Rinse cautiously with water for several minutes, remove contact lenses if present, keep rinsing, consult a healthcare provider for persistent irritation
Ingestion: Rinse mouth, drink water, do not induce vomiting, get medical advice if feeling unwell
Most Important Symptoms: Mild irritation of eyes or skin, no delayed effects expected
5. Fire-Fighting Measures
Suitable Extinguishing Media: Foam, dry chemical, water spray, carbon dioxide
Unsuitable Media: High volume water jet (may spread product)
Specific Hazards: Burning may produce fumes of carbon oxides and silicon oxides
Special Protective Equipment: Firefighters should use self-contained breathing apparatus
Special Procedures: Cool closed containers with water spray, prevent runoff. Prohibit entry to sewers and drains
6. Accidental Release Measures
Personal Precautions: Wear gloves and goggles, ventilate area, avoid breathing vapors
Environmental Precautions: Block any entry to sewers, surface water, or drains
Containment: Absorb with inert material (sand, earth), clean up with non-sparking tools
Disposal: Collect for proper waste disposal by licensed facility
Decontamination: Wash area with soapy water, ventilate and monitor for residue
7. Handling and Storage
Handling: Minimize contact with skin and eyes, avoid ingestion or inhalation of vapor or mist, use only with adequate ventilation, wash thoroughly after use
Storage Conditions: Store in tightly sealed original containers, keep away from strong oxidizers and acids, store in cool, dry, well-ventilated area, avoid direct sunlight or freezing temperatures
Special Requirements: Use secondary containment to avoid accidental release, keep out of reach of children
8. Exposure Controls and Personal Protection
Occupational Exposure Limits: No established limits for major components
Engineering Controls: Use local exhaust ventilation where vapor or mist form, implement spill prevention
Personal Protective Equipment: Nitrile gloves, splash-resistant goggles, protective clothing, in case of spills use chemical-resistant boots
Respiratory Protection: Use approved respirator if ventilation is inadequate
Hygiene Measures: Wash hands before eating or drinking, do not smoke in work area, remove contaminated clothing promptly
9. Physical and Chemical Properties
Appearance: Milky white liquid
Odor: Slight, faint silicone-like
pH: 7.0 – 8.5
Melting Point/Range: No data available (remains liquid at room temperature)
Boiling Point/Range: >100°C
Flash Point: >200°C (closed cup, estimated)
Evaporation Rate: Negligible
Solubility: Dispersible in water
Vapor Pressure: Very low
Density: 0.95 – 1.03 g/cm³
Viscosity: Moderate (500 – 2000 cP)
Partition Coefficient (n-octanol/water): Not determined
10. Stability and Reactivity
Chemical Stability: Stable under normal handling and storage conditions
Reactivity: Inert with most substances, non-corrosive
Hazardous Reactions: No dangerous reactions under recommended use
Conditions to Avoid: Extreme heat, freezing, strong oxidizers
Incompatible Materials: Strong acids, bases, and oxidizing agents
Decomposition Products: Burning yields CO, CO₂, silicon oxides
11. Toxicological Information
Acute Toxicity – Oral: LD50 (rat) > 5000 mg/kg (low toxicity)
Acute Toxicity – Dermal: LD50 (rabbit) > 5000 mg/kg
Acute Toxicity – Inhalation: No adverse effects expected from inhalation under normal use
Skin Irritation: May cause mild irritation after prolonged or repeated contact
Eye Irritation: Slight, reversible irritation possible
Sensitization: Not expected to cause skin sensitization
Long-term Effects: Not listed as a carcinogen, mutagen, or reproductive toxin by IARC, NTP, OSHA
Target Organs: No known systemic effects
12. Ecological Information
Aquatic Toxicity: Low toxicity to aquatic life, not expected to threaten most species at dilution rates typical in operations
Persistence and Degradability: Main components slowly degrade in environment; not readily biodegradable
Bioaccumulation Potential: Low, product does not accumulate in animal tissue
Mobility in Soil: Moderate, may adsorb to sediments
Additional Notes: Use best practices to prevent unnecessary release to surface water and soil
13. Disposal Considerations
Disposal Methods: Dispose of unwanted product via licensed chemical waste disposal contractor, do not pour into drain, surface water, or soil
Container Handling: Rinse containers, recycle or offer to licensed waste disposal entities
Contaminated Packaging: Empty containers may retain residue, handle as hazardous waste
Regulatory Waste Codes: Not listed as hazardous under RCRA, local regulations may vary
Special Precautions: Follow all local and state regulations for non-hazardous industrial waste
14. Transport Information
UN Number: Not regulated for transport
Proper Shipping Name: Non-hazardous chemical blend (Defoamer, water-based)
Transport Hazard Class: Not classified
Packing Group: Not assigned
Transport Labels Required: None
Special Transport Precautions: Prevent container from tipping or leaking during movement, avoid freezing
15. Regulatory Information
US TSCA: All ingredients present on inventory
SARA Title III, Section 313: Not subject to reporting
OSHA Status: Not hazardous as defined by OSHA Hazard Communication Standard
State Regulations: Not listed under California Proposition 65, Massachusetts, New Jersey, or Pennsylvania hazardous substances
EU REACH: Meets requirements for non-hazardous classification
Other Information: Product meets guidelines for biodegradable foam suppression, follow company policy and local regulations for any special requirements